home *** CD-ROM | disk | FTP | other *** search
/ TPUG - Toronto PET Users Group / TPUG Users Group CD / TPUG Users Group CD.iso / MSDOS / (m)aaj / MINIHOST.HLP < prev    next >
Text File  |  1986-07-04  |  7KB  |  158 lines

  1.                                    MENU OPTIONS
  2.                                    ------------
  3.  
  4.  
  5.      The following   menu  options are  available to the caller provided the
  6.      necessary security level has been obtained by the SysOp.
  7.  
  8.  
  9.      (A)scii Color - on/off
  10.      ----------------------
  11.      This command, when enabled, will allow color on those systems properly
  12.      configured.   There are  three requirements  before  this  will  work.
  13.      First, the  caller must  have  set his  communication parameters  to 8
  14.      bits, no parity.  Secondly, he must be running software which supports
  15.      this option.   Qmodem,  Procomm, and  Pibterm are three such examples.
  16.      Most require  that ANSI.SYS be installed on the home system.  This can
  17.      be done  by putting  the line  DEVICE=ANSI.SYS in the CONFIG.SYS file.
  18.      Thirdly, he must have a color monitor.
  19.  
  20.      NOTE:  A SysOp using a composite monitor with a color graphics adaptor
  21.      may not enable this feature.
  22.  
  23.  
  24.      (B)uzz Back
  25.      -----------
  26.      This command, when enabled, will instruct MINIHOST to call you back at
  27.      the   Call  back  number  placed in the configuration file.  It is not
  28.      likely you will have this option available to you.
  29.  
  30.  
  31.      (C)hange Directory
  32.      ------------------
  33.      This command  allows a  caller to  move within  the  hard  drive.    A
  34.      knowledge of path and sub-directory protocol is advisable.    Entering
  35.      '\' alone would  change to  the root  directory.   Typing '\games' may
  36.      change to  the 'games'  directory, if  one exists. By pressing  (F)ile
  37.      Directory while  you are in  the "ROOT" directory,  you will see  most
  38.      of  the  sub-directories  that  are  available;  they  end  with   the
  39.      filename  extension  of    ".DIR"  .    Due  to  security restrictions
  40.      you may not be allowed in a particular sub-directory.
  41.  
  42.      You may NOT enter a drive specifier here.
  43.  
  44.  
  45.      (D)ownload File
  46.      ---------------
  47.      Entering 'D' from the menu will allow you to download (send) a program
  48.      from this  system.   Xmodem (checksum   & CRC) and ASCII protocols are
  49.      supported.   You may   NOT  enter a directory or drive specifier here.
  50.      You must  have specified  the correct drive and/or sub-directory prior
  51.      to selecting  the D for download.  When you select D for download, the
  52.      system will prompt you for the filename.  After you enter the filename
  53.      and if  the file  is found,  the  system  will  then  prompt  for  the
  54.      protocol.  You will see:
  55.  
  56.      0 - EXIT will abort the download.
  57.      1 - ASCII  this is for the  ASCII protocol.  This should  ONLY be used
  58.          with text files.  It is not to be used with programs, source code,
  59.          or squeezed/compressed  or ARChived  (i.e., .ARC extension)  files
  60.          where error correction is necessary.
  61.      2 - XMODEM  (CRC  or CHECKSUM).   Minihost  will determine whether you
  62.          have requested CRC  or Checksum  protocol.  If you  choose to have
  63.          error correction using Xmodem, just press the number 2. Next, from
  64.          your end your must choose between CRC or Checksum protocol.
  65.          Minihost will respond appropriately.
  66.  
  67.  
  68.      (E)nter Message
  69.      ---------------
  70.      This option will allow you to enter a message to a fellow user.  It is
  71.      limited to  20 lines of text.   If there is already a message waiting,
  72.      your message will be  appended to the other  message.  When the  named
  73.      user calls in,  the  message is  displayed right after log-on. Use (P)
  74.      to pause the  display/playback of the message or use (S) to completely
  75.      halt the display and have Minihost resume normal operation.
  76.  
  77.  
  78.      (F)ile Directory
  79.      ----------------
  80.      This option  will  give  you  a  listing  of  the  various  files  and
  81.      directories on  the system.   The  file size will follow the directory
  82.      entry.   Size is rounded to the nearest 'K' (1024 bytes).  Directories
  83.      will end with DIR, DBASE.........DIR would be a valid directory.
  84.  
  85.  
  86.      (G)oodbye
  87.      ---------
  88.      Self explanatory.  Logs off the caller.
  89.  
  90.  
  91.      (H)elp with Host
  92.      ----------------
  93.      Displays this text file.
  94.  
  95.  
  96.      (L)og New Drive
  97.      ---------------
  98.      This is the provision for changing the default logged drive.
  99.  
  100.  
  101.      (O)perator Chat
  102.      ---------------
  103.      Selecting this  option summons the SysOp and if answered, will provide
  104.      for real-time conversation via the keyboards.  The system will beep at
  105.      the Sysop.   If  he is  available, he  can press any key to enter chat
  106.      mode. To exit the chat mode the  either end can  press the ESCape key.
  107.  
  108.  
  109.      (M)essage to SysOp
  110.      ------------------
  111.      A  message  to the  SysOp is  left  in the file  MINIHOST.LOG.  Anyone
  112.      with security  clearance to read MINIHOST.LOG can read these messages.
  113.      This  can be used  to provide public  messages if all  users have  the
  114.      necessary security clearance.  Another approach is to enable new users
  115.      (with CLOSEDSYSTEM=N) and allow them limited  access to the  system as
  116.      follows.
  117.  
  118.      If a NEWUSER  wished to access to the  system, they could  choose this
  119.      option and leave the following information for the SysOp:
  120.  
  121.      1.  Real First and Last Name
  122.      2.  Address  (include city, state, and zip code).
  123.      3.  Home phone number
  124.      4.  Work phone number
  125.      5.  Type of computer system
  126.      6.  Hours that you can be reached by phone
  127.  
  128.      After approving  the request, the users  security clearance  would be
  129.      increased accordingly.
  130.  
  131.  
  132.      (P)rogram Descripts
  133.      -------------------
  134.      The file  listed by  this option is created when a program is uploaded
  135.      by a  caller.   It can  be edited  by the  sysop to reflect the proper
  136.      subdirectory the uploaded file was transferred to.
  137.  
  138.  
  139.      (R)ead Log File
  140.      ---------------
  141.      This selection  allows the  caller to read the private messages to the
  142.      Sysop and  see what other users have done while on the system and what
  143.      files they  have  uploaded/downloaded.   Depending upon  how the SysOp
  144.      has configured the system, you may not have clearance for this option.
  145.  
  146.  
  147.      (S)earch for File
  148.      -----------------
  149.      This  selection will  search EVERY  subdirectory  for the  wildcard /
  150.      filespec you specify and give the path if found.
  151.  
  152.  
  153.      (U)pload File
  154.      -------------
  155.      This function  is similar  to the  Download option, except the file is
  156.      sent from  the caller  to the  host system.   A  provision is made for
  157.      entering a description of the uploaded file.
  158.